10 Things Your Competitors Lean You On How To Install Ghost Immobiliser

How to Install a Ghost Immobiliser

A ghost immobiliser is a hidden security system that protects your vehicle from hacking and key cloning. It works by stopping the engine from running until it is started with the PIN code that is up to 20 characters long.

This extra layer of protection is not visible to thieves who might not be aware of it. Certain systems have an app that allows the owner to disable their immobiliser if they forget their PIN or utilize the service/valet mode.

Connecting to the vehicle's CAN bus

The Ghost 2 Immobiliser is a cutting-edge security system, is able to be integrated directly into the ECU of your vehicle. It provides a discreet security barrier against thieves. It is extremely efficient and user-friendly, making it a valuable component of your vehicle's security arsenal. Like all anti-theft devices it's not foolproof and requires regular maintenance to function effectively. This guide will help you get the most of your Ghost 2 immobiliser.

CAN (Controller Area Network) is a robust serial networking that allows microcontrollers to communicate with each over short distances. A central control unit is not required. It is designed to multiplex electrical wiring within vehicles to save on copper and offers a range of advantages, such as low cost and ease of use.

In most modern cars In modern cars, the CAN protocol is used to communicate with a variety of systems, including the engine management system (EMS) transmission controller, steering module, air conditioning controls and more. It also transmits sensor data, such as speed sensors and inputs to control the various functions of the car. The CAN bus is used to monitor these different components, and can prevent the vehicle from starting if they're in an unsafe state.

While the CAN bus could be employed for a variety reasons, it's essential to understand how it works and how it's secured. It's possible to add new features to vehicles using CAN bus, but it's crucial to safeguard it from hackers and other threats. The best way to accomplish this is to install a firewall and monitoring your CAN bus with software.

Ghost2's control unit is hidden inside the car's wiring harness or dashboard, which eliminates the possibility of a thief physically altering it. It is impossible to reset a pin code or emergency code without having access to the car.

If you need to surrender your vehicle to a valet parking service, maintenance, or any other reason, you can use the Transport Mode. This feature turns off both the keyfob and ignition functions of the Ghost immobiliser. It will only be activated when the vehicle has reached 31 mph for a time of 15 minutes.

How do you create a PIN code

The Ghost immobiliser is an effective security system that protects your vehicle from theft. The latest technology utilizes the PIN code to disable the engine and stop it from running without the correct code or an authorized fob/mobile device. Its discreet design ensures that the system is unnoticeable and offers unbeatable protection against theft. Furthermore the system is TASSA verified and can result in significant savings on insurance premiums for cars.

During the installation, Ghost enters a "learning mode" to record the sequence of buttons that are pressed in order to create unique pin codes. The installer will guide you through activating the system after the pin code is created. Once activated, the Ghost system disables the motor that starts your vehicle unless you enter a valid PIN or switch the vehicle into transport mode. This makes it extremely difficult for thieves or cloners who want to hack or duplicate the starter system of your vehicle.

It is easy to install it is easy to install a Ghost immobiliser, however, you must follow the detailed instructions provided in the user guide to ensure that it is operating properly. Hand tools are essential in making accurate connections and a multimeter can assist in determining electrical values. Insulation tape and heat shrink tubing can protect exposed wiring and cable ties are essential for keeping everything neat and secure. Check the system on a regularly basis to detect any potential issues.

It is important to test the system one last time before you turn on the ignition. The Ghost immobiliser will arm itself after a period of 3-30 seconds, depending on your car's model. The system also has an option for Service/Valet that allows you to temporarily disable the system while you are servicing your vehicle or valet parking.

Idealy,  conversational tone  will be hidden under the dashboard or the steering wheel. Use a small piece duct tape or paint over the wires CAN H and L to make them easier to locate during testing. Additionally, the CAN H and CAN L wires must be connected to a power source that has continuous 12V. It is essential to test the connections again after testing as the incorrect identification of these wires could cause the system to malfunction.

Activating the system

A ghost immobiliser stops your car from starting unless you press a set of buttons within the car, usually the steering wheel, door panel or central console. The sequence can be changed by the user in case it is needed. Once the system is activated, it cannot be deactivated by thieves and is a great option for anyone looking to protect their vehicle from theft.

The device is not designed to be able to be detected by modern diagnostics and code-grabbing technologies. It doesn't emit radio frequencies either, making it even more difficult for thieves to detect.

If the device is identified, it will stop the engine from running and sound an alarm with a loud sound to deter thieves. The device can be used to monitor a car's location and assist in the recovery of the vehicle in case it was taken.

Contact Car Specalist Customs for a quote or to discuss your options in an immobiliser that is ghost-like. We are certified to install ghost immobilisers in your vehicle. We will ensure that it is hidden in a place that is hard to reach. We can also install additional security measures, such as a kill switch and wheel lock to ensure your vehicle is secure from theft.

Disarming the System

If you own a Ghost immobiliser that is fitted to your vehicle, it's important to know how to disable it. This will help you in the event that you lock your keys in the car or your battery fails. The system uses an unique PIN code, which only you know. It won't be able to start the vehicle without this code. The easiest way to enter the code is to press a combination of buttons on your dashboard or steering wheel. This is a much easier method than using the key fob and it also prevents anyone from copying your remote.

Unlike some aftermarket immobilisers that require cutting wires to install, Ghost2 is non-invasive and is compatible with your vehicle's bus network to function. Its most notable characteristic is its ability to bypass the engine without impacting your vehicle's normal functions, making it difficult for thieves to use signal boosters to clone your car key. Moreover, it does not emit radio frequencies, meaning thieves won't be able to detect it.

The Ghost system also comes with a Transport Mode that allows you to temporarily disable the security system for situations such as transportation or servicing. This feature is an excellent option if you need to lend your vehicle to someone without sharing the PIN code or if you want to ensure your vehicle is secure while driving it. To activate the Transport Mode you need to press the service button five times in a matter of 2 seconds. The Ghost system will confirm activation via five indication signals.

When you're done, remember to save the emergency code in a secure location outside of your vehicle. If you ever find yourself locked out of your vehicle, you can call the technician or company who installed the system, and they will give you the code. If you are unable to contact them, you can seek out an authorized dealer. However, this could involve verification procedures, and you could be charged additional charges.

This system is not only convenient, but it can also protect your vehicle from theft and lower cost of insurance. Many insurance companies offer reduced premiums or financial incentives to install this system to prevent theft.